Flexible photovoltaic(PV) technology not only has high power efficiency but also is thin and lightweight, enabling seamless adaption to the surface of curved buildings. However, the distinctive spatial geometry of curved surfaces leads to inhomogeneous irradiance, causing electrical mismatch losses. This paper presents a systematic indoor experimental study on the electrical performance of Copper Indium Gallium Selenide (CIGS) cells under various bending configurations, including length-convex (lgvx), length-concave (lgcv), width-convex (wdvx), and width-concave (wdcv). Tests were conducted under standard testing conditions (1000 W/m², 25°C) with central angles ranging from 0° to 180° and placed in longitudinal and horizontal orientations， respectively. Results indicate that width-bending configurations generally outperform length-bending ones due to lower mismatch losses. For width-bending, concave forms exhibit higher power output than convex forms due to a mutual reflection mechanism. Conversely, length-concave forms manifest the highest power mismatch loss (up to 319.70 mW at 180°) due to significant self-shading. These findings provide critical design guidelines for optimizing cell layouts in curved BIPV systems.