Aller directement au contenu principal

Rédiger un PREreview

A Static-Sector Construction for the Low-Energy Fine-Structure Constant in Recursive Interval Geometry

Publié
Serveur de preprints
Preprints.org
DOI
10.20944/preprints202603.2398.v1

We present a limited static-sector construction for the low-energy fine-structure constant within Recursive Interval Geometry (RIG). The recursive substrate itself is not reaxiomatized here; the inherited input is only the canonical principal/structural splitting together with the Ω-weighted norm. The paper introduces four principles: minimal closure with nonempty-state counting, a link–triangle–octahedral carrier hierarchy in one to three dimensions, a display-level readout principle, and a dimension-filtered expansion of the raw structural term. From these assumptions one obtains \( D_1=3,\;D_2=7,\;D_3=127 \), interpreted as nonempty boundary-state counts on minimal one-, two-, and three-dimensional carriers, hence the additive skeleton \( N_{\mathrm{sk}}=137 \) and the multiplicative resolution Ω=2667, together with the display-level form \( \alpha^{-1}=\sqrt{N_{\textup{sk}}^2+\Omega^2\ell_{\textup{raw}}^2} \) . What is not yet absorbed into deeper internal structure is reduced to three residual bridge coefficients in \( \ell_{\textup{raw}}=a_1/\Omega+a_2/\Omega^2+a_3/\Omega^3 \), which are taken in the working model to be \( a_1=\pi \), \( a_2=-2 \), and \( a_3=137+127/2 \). Their strongest current geometric readings are, respectively, the metric normalization of the minimal closed loop, the endpoint subtraction produced when an open interval is closed into a loop, and the sum of the full static skeleton with a third-level shared skeletal load. This yields \( \alpha^{-1}_{\mathrm{RIG}}=137.035999176253147\cdots \), differing from the 2022 CODATA recommended value by \( 7.47\times10^{-10} \) in \( \alpha^{-1} \), or \( 5.45\times10^{-3} \) ppb. The claim is therefore not that quantum electrodynamics has been derived, but that a logically explicit substrate model can be tested as a falsifiable interface proposal.

Vous pouvez rédiger un PREreview de A Static-Sector Construction for the Low-Energy Fine-Structure Constant in Recursive Interval Geometry. Un PREreview est une évaluation d'un preprint et peut varier de quelques phrases à un rapport détaillé, semblable à un rapport d'évaluation par les pairs organisé par une revue.

Avant de commencer

Nous vous demanderons de vous connecter avec votre identifiant ORCID iD. Si vous n'en avez pas, vous pouvez en créer un.

Qu’est-ce qu’un ORCID iD ?

Un ORCID iD est un identifiant unique qui vous distingue de toute personne ayant le même nom ou nom similaire.

Commencer maintenant