Aller directement au contenu principal

Rédiger un PREreview

Biological S 0 reduction at neutral (pH 6.9) and acidic (pH 3.8) conditions: Performance and microbial community shifts in a H 2 /CO 2 -fed bioreactor

Publié
Serveur de preprints
bioRxiv
DOI
10.1101/2024.05.11.592705

Sulfidogenesis is a promising technology for the selective recovery of chalcophile bulk metals (e.g. Cu, Zn, and Co) from metal-contaminated waters such as acid mine drainage (AMD) and metallurgy waste streams. The use of elemental sulfur (S 0 ) instead of sulfate (SO 4 2- ) as electron acceptor reduces electron donor requirements four-fold, lowering process costs, and expands the range of operating conditions to more acidic pH. We previously reported autotrophic S 0 reduction using an industrial mesophilic granular sludge as inoculum under thermoacidophilic conditions. Here, we examined the effect of pH on the S 0 reduction performance of the same inoculum, in a continuously fed gas-lift reactor run at 30 °C under neutral (pH 6.9) and acidic (pH 3.8) conditions. Steady-state volumetric sulfide production rates (VSPR) dropped 2.3-fold upon transition to acidic pH, from 1.79 ± 0.18 g·L -1 ·d -1 S 2- ·to 0.71 ± 0.07 g·L -1 ·d -1 S 2- · Microbial community analysis via 16S rRNA gene amplicon sequencing showed that at pH 6.9, the S 0 -reducing genera Sulfurospirillum, Sulfurovum, Desulfurella , and Desulfovibrio were present at the highest relative abundance, while at pH 3.9 Desulfurella dominated the sequenced reads. The detection of acetic acid and the relative abundance of Acetobacterium at pH 6.9 pointed towards acetogenesis, explaining the dominance of the heterotrophic genus Sulfurospirillum in this H 2 and CO 2 –fed bioreactor.

Vous pouvez rédiger un PREreview de Biological S 0 reduction at neutral (pH 6.9) and acidic (pH 3.8) conditions: Performance and microbial community shifts in a H 2 /CO 2 -fed bioreactor. Un PREreview est une évaluation d'un preprint et peut varier de quelques phrases à un rapport détaillé, semblable à un rapport d'évaluation par les pairs organisé par une revue.

Avant de commencer

Nous vous demanderons de vous connecter avec votre identifiant ORCID iD. Si vous n'en avez pas, vous pouvez en créer un.

Qu’est-ce qu’un ORCID iD ?

Un ORCID iD est un identifiant unique qui vous distingue de toute personne ayant le même nom ou nom similaire.

Commencer maintenant