Escribe una PREreview

This study investigates the minimum ignition temperature of smoldering paper scraps with varying bulk densities and lengths under different external airflow rates. Paper scraps of different lengths were compressed to modify the bulk density within the smoldering fuel bed. The ignition tests were performed using a rod-heater with a controlled temperature range of 350-450℃. Once the rod-heater reached the preset temperature, the current was turned off, and the rod-heater was inserted into the center of the vertically oriented combustion chamber filled with paper scraps. By recording the temperature variations at different locations within the combustion chamber, the ignition limits of smoldering paper scraps with varying bulk densities under different external airflow rates were determined. The results showed that in the absence of external airflow and with a fixed paper scrap length, the ignition limit of smoldering paper scrap exhibits a clear U-shaped trend as bulk density increases. Furthermore, we found that in the absence of external airflow, the length of paper scraps had no significant effect on the ignition limit in the low bulk density range. However, in the high bulk density range, the ignition limit increased with scrap length. As for cases with external air flows, the ignition limit of paper scrap smoldering combustion once again exhibits a U-shaped trend with varying bulk density. Compared with the condition without forced airflow, however, the inflection point of the U-shaped curve shifts toward the higher-density region. Moreover, within the range of externally forced airflow rates examined in the present study, the length of paper scraps had no significant effect on the smoldering ignition limit.